Rhiannon Forsyth
Gavin is super reliable and trustworthy. Have already recommended to friends. Thank you so much Gavin!
Full and partial rewires across South Wales, tested and certified
G&M Electrics carries out full and partial house rewires across Merthyr Tydfil and South Wales. We replace old or unsafe wiring, fit a new consumer unit where needed, and test and certify the whole installation. Every rewire is priced from a free survey as the work varies from house to house, and we keep mess and disruption to a minimum.
Old wiring does not last forever. If your home still has rubber or fabric cabling, a fuse board from decades ago, or sockets that are scorched or far too few, a rewire brings the whole installation up to current safety standards. We carry out full and partial rewires on homes across Merthyr Tydfil and the wider South Wales area.
We start with a free survey so we understand the property and exactly what needs doing, then agree a fixed price before any work begins. On a full rewire we replace the cabling, sockets, switches and the consumer unit, and we plan the work around you to keep rooms usable and mess to a minimum.
Where you only need part of the house done, a kitchen, an extension or a single problem circuit, we can carry out a partial rewire rather than disturb the whole property. Everything goes through first fix and second fix, then is fully tested before we finish.
When the work is done we test, certify and register the installation, so you have the paperwork to prove it is safe and compliant. Because every house is different, rewires are quoted individually after the free survey.
We are based in Merthyr Tydfil and cover Aberdare, Pontypridd, Caerphilly, Tredegar, Ebbw Vale, Bargoed and Cardiff, along with the surrounding South Wales towns. If you are not sure whether you are in our area, give us a call on 07584 294650 and we will let you know.
Yes. G&M Electrics Ltd is NAPIT registered, so our work is inspected and certified to current wiring standards. Director Gavin Morgan qualified as an electrician in 2018 and personally oversees every job.
No. Quotes are free. Tell us about the job, or send a couple of photos, and we will come back to you with a clear fixed price before any work starts.
Yes, emergency call-outs are available. If you have lost power or have an electrical fault that cannot wait, call 07584 294650 and we will help as quickly as we can.
Yes. Notifiable electrical work is tested and certified, and we give you the paperwork you need for insurance and for selling your home.
We agree a fixed price with you up front and confirm the payment details before we start, so there are no surprises when the job is done.
Most home EV charger installations fall between £700 and £1,000 supplied and fitted. The final price depends on the charger you choose, where it is mounted and how far the cable has to run. We confirm a fixed price before starting.
Not always. If your existing board has spare capacity we can wire the charger straight in. If it does not, we fit a separate small consumer unit just for the charger, which avoids the cost of a full board upgrade.
A straightforward home installation is usually completed in a few hours on the same day. We will give you a clear idea of timing when we quote the job.
Yes. We install workplace charge points as well as home units. Get in touch with the number of chargers and the site details and we will put a quote together for you.
Yes. We take care to keep cable runs neat and concealed where possible, so the finished charge point looks like part of the property rather than an afterthought.
A new consumer unit is usually between £800 and £1,000, depending on the number of circuits and the condition of the existing wiring. We give you a fixed price after a quick look at your current board.
Your power is normally off for around three hours while we carry out the change. We work efficiently to get you back up and running as quickly as possible.
Older boards offer far less protection than a modern unit and can trip for no clear reason. A new consumer unit adds RCD and surge protection, brings your installation up to current standards and makes your home safer.
Yes. Once the new board is in we test the full installation, hand you a certificate and talk you through what has been done.
Not necessarily. Constant tripping is often caused by an old board or a single faulty circuit rather than the whole installation. We can find the fault and, in many cases, a new consumer unit sorts it without the cost of a full rewire.
Rewires are priced individually because the cost depends on the size of the property, how much needs doing and whether it is a full or partial rewire. We give you a fixed price after a free survey, with no obligation.
A typical house rewire takes from a few days to around a week, depending on the size of the property and whether anyone is living there during the work. We give you a clear timescale with your quote and plan the work to keep disruption down.
PAT (portable appliance) testing is the inspection and testing of plug-in electrical equipment, such as appliances, tools and extension leads. Each item is checked, tested and labelled, giving you a documented record for safety and insurance.
Landlords in Wales must have the fixed wiring inspected at least every five years with an EICR, and many also need PAT testing and emergency lighting testing depending on the property. We can advise what your property needs and carry it all out.
Our EICRs start from £150. The exact price depends on the size of the property and the number of circuits, and we will confirm it before we book you in.
Rented properties in Wales legally need an EICR at least every five years. For your own home, every ten years or when buying or selling is a good guide, or sooner if the installation is old or you have any concerns.